Upgrading to Windows 11 on an old PC might be easier than you think

Although support for Windows 10 will not end in October 2025 after all, the additional grace period is only one year. This means that many users will soon not only have to say goodbye to their operating system, but also to their computer.

Even if its components are powerful enough for Windows 11, it may become electronic waste: This is because Microsoft has strict requirements for the hardware on which the new operating system can run — especially when it comes to the processor.

Most PCs and laptops that are more than eight years old are therefore excluded from the upgrade — even though they work without any problems under Windows 10 and would certainly do the same under Windows 11.

However, you can make your computer officially fit for Windows 11 with small hardware upgrades: Whether this is worthwhile, whether it is even possible, and how much it costs depends on the specific PC or laptop.

What your computer needs for Windows 11

The requirements that Microsoft places on a computer for Windows 11 look low at first glance:

• Processor with 64-bit support, two cores and a clock speed of 1GHz
• 4GB RAM
• 64GB storage for the installation

Many old computers fulfill these requirements, which aren’t dissimilar from the requirements for graphics hardware with Direct X 12: Even PCs that are over 10 years old have suitable components.

The same is true of Microsoft’s demand for a motherboard that has UEFI firmware with the Secure Boot function: This was already mandatory for computers with Windows 8, so complete systems should have been equipped with it since 2013.

The requirement for TPM 2.0 is more problematic: Windows stores security keys in the Trusted Platform Module, which also monitors the PC boot process to ensure that no malware is active before Windows loads.

TPM 2.0 was mandatory for complete systems with Windows 10, meaning that computers sold since the end of 2016 should be equipped accordingly. Prior to this, PCs and laptops were usually equipped with TPM 1.2 — which Microsoft believes makes them too insecure for Windows 11.

However, most computers will fail to overcome one hurdle when switching to Windows 11: According to Microsoft, they absolutely need a processor that is on the official compatibility list, which is available for Intel, AMD, and Qualcomm models.

This rules out all computers intended for private users that are equipped with an Intel processor before the 8th Core generation (“Coffee Lake,” “Kaby Lake R,” “Kaby Lake G,” “Amber Lake Y”) or an AMD CPU whose cores are not based at least on the Zen architecture.

Complete systems with a supported CPU were available from spring 2018 — so if your computer is more than seven years old, Windows 11 cannot be installed without detours.

WhyNotWin11

However, the Microsoft list is not consistent: Older processors such as the Intel Core i7-7820HQ from early 2017 or newer ones such as the AMD Athlon 3000G from the end of 2019, which is based on the Zen architecture, are also listed as suitable for Windows 11, although other processors with this architecture are excluded.

Microsoft published new lists for the individual processor manufacturers for the Windows 24H2 update in February: They mainly contain more recent CPU models.

However, some CPUs that were previously listed as supported have also been removed — including individual models from generations that are actually considered compatible with Windows 11.

Whether this was accidental or intentional is unclear. These lists are actually aimed at PC manufacturers (OEMs), not private users.

With older processors in particular, they do not give you any definitive certainty as to whether a particular CPU is supported by Windows 11 — and even if it is now, whether this will also apply to future updates of the operating system.

How to check whether your PC is ready for Windows 11

If your computer is suitable for Windows 11 in its current configuration, you will be prompted at regular intervals to switch to the new system.

Windows 10 also indicates this with a large window in the settings under “Windows Update”.

Foundry

If this is not the case for you, you can use tools to check how Windows 11-ready your PC is. Microsoft offers the PC Health Check for this purpose. Start the check by clicking the blue “Check now” button.

If the computer fulfills the requirements for Windows 11, the overall result and the results for the individual components are highlighted in green.

A yellow mark means that the tool could not perform the test for a specific requirement because the components or function was not recognized or has not yet been activated — for example, because Secure Boot is switched off.

A cross in a red circle indicates that this component is preventing the upgrade to Windows 11 — in most cases the processor.

Incidentally, you should not trust the age information displayed on the left-hand side of the tool’s start screen — it simply guesses based on certain system information, which has nothing to do with the actual age of the hardware or the Windows installation.

The freeware WhyNotWin11 also checks the Windows 11 compatibility of the individual components and functions: Green means passed, red means failed.

If the check tool reports that Secure Boot could not be detected, it may be because you have not activated this function. First start the Windows system information by running

msinfo32 

in the main window: “UEFI” must be in the “BIOS Mode” line. If “Off” is displayed for “Secure Boot State,” the UEFI supports Secure Boot, but it is not activated.

To switch on Secure Boot, call up the UEFI settings: The most reliable way to do this is to click on “Restart now” in the Windows settings under “Update & Security > Recovery > Advanced Boot.”

After a short time, the blue Windows pre-boot environment will appear: Select “Troubleshooting > Advanced options > UEFI firmware settings > Restart.”

The computer now calls up the UEFI setup: Depending on the manufacturer, you will find the options for Secure Boot in the “Boot” or “Security” section. There, set Secure Boot to “Enabled,” “Switched on,” “UEFI,” or “Windows UEFI Mode.”

After the restart, the “Secure boot state” in the system information should be set to “On.”

Foundry

Proceed in a similar way to check for TPM: Enter tpm.msc in the Windows search window. If the information for a TPM and “Specification version 2.0” appear, everything is OK, version “1.2” is not sufficient for Windows 11 — you need a new processor here.

If you see “No compatible TPM found,” the TPM may be compatible but not active. Now you need to call up the UEFI again and look for an option such as “Security Device,” “TPM State,” or, on a computer with an Intel CPU, “Intel PTT” or “Intel Platform Trust Technology.”

The corresponding options for an AMD computer are called “AMD fTPM Switch” or “AMD PSP fTPM.” Set them to “On,” “Enabled,” or “Activated.”

You need to replace this hardware for Windows 11

For an older PC, the route to Windows 11 usually involves changing the processor: Older CPUs also fulfill some of Microsoft’s requirements — they usually come with TPM 2.0 and their motherboard offers UEFI firmware with Secure Boot.

However, the models on the compatibility list have additional functions that their predecessors do not have and that cannot be added later via an update: In most cases, these are security precautions against malware attacks on the operating system.

The quickest and cheapest way to make an older PC fit for Windows 11 is to equip it with a processor that Microsoft allows. To do this, you must first clarify whether the CPU in your computer is soldered to the motherboard or sits in a socket — only then can it be replaced at all.

Find out the model designation of the CPU — for example via the Windows Device Manager under “Processors,” in the Windows settings under “System > Info,” or with a hardware analysis tool such as HWinfo 64 or Speccy.

Then research the technical data for this model on the processor manufacturer’s website — for example ark.intel.com. The hardware tools are also helpful — in HWinfo 64, look for “Main processor -> CPU platform.”

If terms such as “Socket,” “PGA,” or “LGA” appear there, it is a socketed processor that can generally be expanded. If, on the other hand, you see the abbreviation “BGA,” also in the form “FC-BGA,” the processor is soldered onto the board — you cannot replace it.

A complete PC with a desktop or tower housing usually has a socketed processor, whereas in many laptops the CPU is soldered.

However, there are exceptions: All-in-one PCs or small mini PCs often use soldered laptop CPUs, while large laptops — for example, gaming and high-end laptops — often have a socketed processor.

Intel: How to choose a suitable processor

If the processor can be changed, the next step is to clarify whether a Windows 11-compatible model can be used instead. The new processor must fit into the existing slot on the motherboard installed in the PC.

For older computers with Intel processors, your chances are slim: The socketed models from the CPU generations that are suitable for Windows 11 — from Coffee Lake onwards — use a different slot than their predecessors.

This is also called LGA1151 — but version 1 differs from version 2 for Coffee Lake in terms of the electrical connections: You can therefore use a newer processor, but it will not work.

When switching to Windows 11, you will therefore need a new processor and a new motherboard for the Intel platform.

IDG

Depending on how powerful you want your computer to be after the upgrade, the upgrade will cost you between around $200 and $500.

In addition, you can skip several CPU generations from Intel when buying a new processor and motherboard, as newer models are hardly more expensive than older ones: This not only makes the updated computer fit for Windows 11, but also gives it a generous increase in speed.

If your old PC uses DDR4 RAM, you can even use the RAM on a board for the 14th core generation “Raptor Lake-R” from last year: A suitable motherboard such as the Asus Prime H610M costs around $100, and you can get a solid mid-range processor such as the Core i5-14400 as a boxed version with cooler for around $140.

It will be significantly more expensive if you want to equip your old PC with the latest CPU generation Arrow Lake: Inexpensive processors such as a Core Ultra 5 225 cost around $250, with a suitable motherboard costing just over $100.

You will also need DDR5 RAM, which is around $40 for 16GB capacity. If you only have a tight upgrade budget, you can opt for a board with an LGA1200 slot for an Intel PC:

CPUs up to the 11th-generation Rocket Lake can be used there, such as a Core i5-11400F, which costs around $115 with a fan. In addition, an LGA1200 board such as the Gigabyte H510M v2 costs around $100.

There are no costs for a new drive in any case: All boards for the upgrade options shown have M.2 and SATA connections so that you can continue to use an existing SSD — unless you need a flash memory with a larger capacity.

The cheapest M.2 and SATA SSDs with 512GB are around $30 — an SSD with PCI Express 3.0 is sufficient for M.2 because the recommended boards do not support a higher PCIe version for the drive.

In many cases, you can continue to use your existing power supply unit: Its connections should be suitable for the new board and the new components, unless you are using a powerful graphics card. However, it is generally advisable to replace the power supply unit on a computer that is six years old or older.

Hardware upgrade for an AMD computer

The upgrade path to Windows 11 is more favorable if you have a computer with an AMD processor: The manufacturer continued to use the AM4 socket for the older processors until 2022.

This means, for example, that a Ryzen 7 1700 that does not work with Windows 11 can be replaced with a processor from the Ryzen 5000 series, such as the Ryzen 7 5700 or the Ryzen 7 5800XT.

These models are still readily available and cost between $120 and around $180 with cooler.

IDG

Before you buy the new processor, check whether your existing motherboard supports it: The manufacturer must provide a suitable UEFI update, which can be found out on the support pages for the relevant board.

You can continue to use the built-in RAM and an existing SSD.

As with Intel, newer AMD processors support higher clock rates for DDR4: In everyday PC use, however, it is usually hardly noticeable that the existing DDR4 memory in the old computer runs a little slower.